Search results

The purpose of this paper is to present a novel GREY‒ASMAA model for reliability growth evaluation in the large civil aircraft test flight phase.

As limited data are collected during the large civil aircraft test flight phase, which are not enough to meet the requirements of the ASMAA model for reliability growth, four basic GM(1, 1) models, even grey model, original difference grey model, even difference grey model and discrete grey model, are presented. Then both forward and backward grey models GM(1,1) are built to forecast and obtain virtual test data on left and right sides. Then the ASMAA model for reliability growth evaluation can be built based on original and virtual test data.

Aiming at the background of poor information data during the large civil aircraft test flight phase, first, a novel GREY‒ASMAA model, which was combined by the grey model GM(1,1) with the ASMAA model, has been put forward in this paper.

The GREY‒ASMAA model for reliability growth evaluation can be used to solve the problem of reliability growth evaluation with poor information data during the large civil aircraft test flight phase, and it has been used in reliability evaluation of C919 at the test flight stage.

This paper presents two new definitions of forward grey model GM(1,1) and backward grey model GM(1,1), as well as a novel GREY‒ASMAA model for reliability growth evaluation of large civil aircraft during test flight phase.

The paper attempts to design an efficient algorithm for bearing track correlation of multi‐sensor on the same platform using grey incidence analysis which is on the basis of the line segment Hausdorff distance.

Starting from the line segment, Hausdorff distance that has been extended to calculate the distance between line segment sets by many scholars has been used for face recognition achieving good results. The degree of grey incidence is defined based on the above distance and properties which include normality, symmetry and closeness, are proved. Furthermore, a grey incidence matrix is built. With only the azimuth information detected by bearing sensors track correlation is difficult to judge, however grey incidence analysis can quickly and accurately determine whether two tracks are from the same target, and so an algorithm is designed to solve this dilemma. In the last part of the paper simulation experiment is conducted.

The results are convincing: not only the algorithm proposed in the paper can solve the problem of track correlation of bearing‐only sensors, but also the algorithm can judge the correlation degree of both tracks even in the case of intensive targets.

The method exposed in the paper can be used to judge correlation degree of tracks detected by different sensors even for less information, and also be used to determine the similarity of two waveforms in the field of engineering.

The paper succeeds in introducing the line segment Hausdorff distance into grey incidence analysis and on the basis of that an algorithm is designed to solve the problem of track correlation.

The purpose of this paper is to attempt to analyze the situation and trend of China's energy consumption structure and predict it.

Starting from the situation of China's energy consumption structure, a quadratic programming model is created to analyze the trend of it. A homogeneous Markov chain is chosen to predict China's energy consumption structure with the data collected from China's Statistical Yearbook. Finally, the implication of the prediction is explained.

The results are convincing: the substitution of different energies are found, China will not enter the oil era, natural gas and non‐fossil energy will rapidly develop.

The results of this article can provide an important basis for the government to make a non‐fossil energy development plan and energy policies.

The paper succeeds in revealing and predicting China's energy consumption structure by quadratic programming and homogeneous Markov chain.

Nearly a century ago, Max Weber studied Chinese lineage system and argued that the power of the patriarchal sib impeded the emergence of industrial capitalism in China. Recently, Martin Whyte re-evaluated Weber's thesis on the basis of development studies and argued that, rather than an obstacle, Chinese family pattern and lineage ties may have facilitated the economic growth in China since the 1980s. This paper empirically tests the competing hypotheses by focusing on the relationship between lineage networks and the development of rural enterprises. Analyses of village-level data show that lineage networks, measured by proportion of most common surnames, have large positive effects on the count of entrepreneurs and total workforce size of private enterprises in rural China.

This paper aims to enhance the responsiveness of enterprises with regard to delivery schedules in a supply chain. Based on the observations in industry, it seems that companies often re‐negotiate their due‐dates. These phenomena have begun to appear only recently, as a result of the advancements of information technology and flexibility in the supply chain. However, these due‐date re‐negotiation processes are haphazard and ad hoc in nature, and a formal process is needed to respond to market fluctuations more quickly. In this paper, a re‐negotiable order processing method is developed that can change the already‐assigned due‐dates or allow partial shipments to increase the flexibility of firm response to a rush order from a prior customer (PC).

A due‐date re‐negotiation process is defined and a formal system for handling customer orders is proposed. The new data and business process integration model are proposed for the due‐date re‐negotiation process based on RosettaNet's Partner Interface Processes. Web services and ubiquitous computing technologies are used in the proposed system architecture to allow for responsive sales order management.

The paper shows that assigned due‐dates can also be re‐negotiated by enhancing the connectivity and visibility of the supply chain with co‐operative customers. In the early stage of the product life cycle or high‐regional demand variation environments, it is better to re‐negotiate due‐dates than to meet scheduled due‐dates.

In some instances, meeting the due‐date requested by a customer relates to the success or failure of a particular sales order. The proposed re‐negotiation method could help the sales offices of the MF to respond to PC requests quickly and flexibly. Rush orders from PC might be acceptable based on the slack gained through the re‐negotiation of co‐operative customers' assigned orders.

There has been a considerable volume of studies on the due‐date assignment, order releasing, and scheduling problems. However, these previous studies considered due‐dates as exogenous parameters or fixed endogenous variables. In this paper, the assigned due‐dates for pre‐contracted co‐operative customers are considered as re‐negotiable variables. On the other hand, most studies on ubiquitous computing technologies, especially those relate to radio frequency identification (RFID), have focused mostly on asset management and processing time reduction. This paper suggests other benefits of increased visibility and traceability of RFID technology in enhancing responsiveness and flexibility in the sales order management system.

The purpose of this paper is to analyze and summarize the development of science and technology (S & T) policies in China from a government-driven perspective in chronological order. To develop knowledge-based economy, China enacts a range of S & T policies since “Reform and Open Policy” started in 1978. Furthermore, it investigates the overall effects of these S & T policies on university-industry linkages (UILs).

This paper conducts an analysis framework of S & T policies in historical sequence to explain how government drives UILs to stimulate technological progress and economic growth in China.

More than a site for high-quality workforce education and knowledge spread, universities as an important part of national innovation are required to participate in economic activities. Considering that most Chinese universities are national, S & T policies with particular regard to university technology transfer would be more important and essential. This research finds that S & T policies enacted by government have made critical contributions to UILs in economic transition period, such as improving academic faculty, enhancing university–industry collaborations and supporting university spin-off formation. The experiences of China suggest that government should enact more effective S & T policies in the knowledge-based economy era.

First, universities need to educate high-level human resources that are important for economic growth and social development. Second, universities need to engage in R & D activities and enhance their collaboration with industries, such as consulting services, research contracts with industry, patent licensing and other general knowledge commercial mechanisms. Third, universities also can directly transfer commercial knowledge to start up new businesses by itself or in partnership with industrial sectors. Without doubt, a series of S & T policies or programs enacted by China’s government to drive entrepreneurship continuously played critical role in the UILs over the past 26 years.

This paper is a pioneering work on how S & T policies enacted by government drive UILs to stimulate technological progress in transitional China.

Because of importance of technological learning for less developed countries, the notion has received increasing attention of scholars. The purpose of this paper is to investigate technological learning systematically by assessing the effect of technology transfer actors on technological learning in less developed countries context.

The paper presents assessment model by adopting technological learning concept based on technology absorption and incremental innovation at firm level and identifying key roles of technology transfer actors (State – Scientific and technological infrastructure – Industry) that affect technological learning. The paper follows survey as research methodology. Thus, a questionnaire was addressed to 33 Syrian textile factories to examine the assessment model. Simple linear, multiple linear and ordinal regression analyses are preformed to examine relationships of model components.

The regression models show notable ability of technology transfer actors to explain technological behavior of firms to accumulate operative capability and consequently to generate passive incremental innovation. The findings indicate passive technical change system of Syrian textile industry. Therefore, goal-oriented evaluation of actual technology policy is preliminary step for achieving improvements, as well as activating scientific and technological infrastructure role by enabling strong relationships with industry and supporting interactions of domestic firms of textile industry and with foreign players.

The paper enriches technological learning literature by proposing systematic approach that sets the nature of technical change process of less developed countries in core of analysis. Moreover, it provides a guide for technological learning practices at firm level and for policymakers based on assessing actual status of Syrian textile industry.

The purpose of this paper is to describe a novel design method to construct lattice structure computational models composed of a set of unit cells including simple cubic, body-centered cubic, face-centered cubic, diamond cubic and octet cubic unit cell.

In this paper, the authors introduce a new implicit design algorithm based on the computation of volumetric distance field (VDF). All the geometric components including lattice core structure and outer skin are represented with VDFs in a given design domain. This enables computationally efficient design of a computational model for an arbitrarily complex lattice structure. In addition, the authors propose a hybrid method based on the VDF and parametric solid models to construct a conformal lattice structure, which is oriented in accordance with the geometric form of the exterior surface. This method enables the authors to design highly complex lattice structure, computational models, in a consistent design framework irrespective of the complexity in geometric representations without sacrificing accuracy and efficiency.

Experimental results are shown for a variety of geometries to validate the proposed design method along with illustrative several lattice structure prototypes built by additive manufacturing techniques.

This method enables the authors to design highly complex lattice structure, computational models, in a consistent design framework irrespective of the complexity in geometric representations without sacrificing accuracy and efficiency.

The purpose of this paper is to present the power noise characteristics of a multilayer printed circuit board (PCB) in which discrete capacitors have been embedded.

Embedded technology has been implemented on a multilayer PCB to enhance the performance and functionality and to decrease the power noise. Decoupling capacitors were directly positioned on the inner power planes of a board, which resulted in low‐loop inductance through the minimized length of the interconnection from the chips to the PCB's power delivery network.

A low‐noise PCB was successfully designed and fabricated using an embedding process for the discrete decoupling capacitors. It was demonstrated that such an approach offers lower interconnection inductance and quiet noise performance, including highly efficient propagation noise suppression at wideband frequencies.

Most conventional simulation techniques offer expectations for the signal characteristics on the time domain to minimize bit error rates in application systems. Further development work will focus on the integrated simulation models including the equivalent circuits for the transmission line and power noise effects to improve the accuracy of the signal performance.

This paper presents a new approach for improving generating and propagating noise performance through the use of an embedded decoupling capacitor design methodology.